Wire Rope Pulling Portable Gas Powered Winch 1 Ton With Gasoline Engine

Wire Rope Pulling Portable Gas Powered Winch 1 Ton With Gasoline Engine​

Winch Introduction

A winch is a mechanical device that is used to pull in (wind up) or let out (wind out) or otherwise adjust the "tension" of a rope or wire rope (also called "cable" or "wire cable"). In its simplest form it consists of a spool and attached crank. In larger forms, winches stand at the heart of machines as diverse as tow trucks, steam shovels and elevators. The spool can also be called the winch drum. More elaborate designs have gear assemblies and can be powered by electric, hydraulic, pneumatic or internal combustion drives. Some may include a solenoid brake and/or a mechanical brake or ratchet and pawl device that prevents it from unwinding unless the pawl is retracted.

Application

Powered winches are the construction tools of erecting electric circuits of high pressure electric transmission in the sky and laying electrical cables underground.

They can complete the tasks of heavy-lifting and dragging such as erecting the wire.

Testified by the experiments and practical uses, they have reasonable structure, small volume, light weight, strong power, nimble operation and convient transporting.

Based on so many advantages, this Powered winch is popular with the electric workers.

Features

Reasonable structure,Small volume,Light weight,Strong power,Nimble operation,Convenient transporting.

Operation methods

Before turning on the machine, you must turn on the clutch first and put the racker for crosspiece - changing in the zero position.

When moving the crosspiece, you should be quick. Otherwise the brake won’t work well. When turning on the machine, you shouldn’t work too fiercely.

When changing the crosspiece position, you must turn on the clutch. Otherwise the gear will be damaged. After that, you should check whether the changing job is well done. Make sure you haven’t changed two crosspieces in one time.

If there is any difficulty during the process of changing crosspiece position, you shouldn’t try to complete the job forcefully. Instead you should use the hand installment to help you complete the job. Concrete procedure: using the spanner to move the hand installment to a position with a certain angle, then you can change the crosspiece position smoothly.

Technical Data