भुगतान & नौवहन नियमों:
|Type:||Hydraulic pump||Application:||Overhead line Construction|
|Useage:||Provide power||Rated Pressure(Mpa):||70|
HP - 1 Manual Operating Tools Hydraulic Hand Pump For Overhead Line Construction
It can provide power for the cutting tool, the hydraulic compressor, punching machine.
and other construction machinery, which is operated in the wild field
in electric power, railway, rescue, construction and other industries.
1. Safe and Reliable
2. Light in weight
3. Convenient and flexible
5. Save time and labor
6. High efficiency
Close the pressure release valve. Operate the pump lever until the desired hydraulic pressure has been achieved. The pressure is indicated on the integral pressure gauge.
Slowly open the pressure release valve and observe the pressure gauge to make sure the pressure has fallen to zero pressure before disconnecting the hoses or tools. Make sure the pump oil reservoir does not become overfilled when releasing pressure.
Operation (Adjusting the pressure)
You can stop releasing the pressure at any time by closing the pressure release valve. The pressure release valve is designed to allow controlled lowering of the pressure. If the pressure falls to far, close the pressure release valve and operate the pump lever again until the correct pressure is indicated on the integral pressure gauge.
To ensure reliable operation and long life it is important to carry out maintenance at set intervals. Follow these simple rules :
Clean the pump before returning to storage
Lubricate the moving parts
Check there are no external hydraulic oil leaks
Check for external damage to the pump
|Type NO.||Rated Pressure(Mpa)||weight(kg)|